SIIG SATA II-150 Technical Support and Warranty, SIIG, Inc Stewart Avenue Fremont, CA 94538 RMA #

Page 15

Technical Support and Warranty

QUESTIONS? SIIG’s Online Support has answers! Simply visit our website at www.siig.com and click on Support. Our online support database is updated daily with new drivers and solutions. Answers to your questions could be just a few clicks away. You can also submit questions online and one of our technical support analysts will promptly respond.

A lifetime manufacturer warranty supplied with this product is offered by SIIG, Inc. Please see SIIG website for more warranty details. If you should happen to encounter any problems with this product,

please follow the procedures below.

If it is within the store's return policy period, please return the product to the store where you purchased from.

If your purchase has passed the store's return policy period, please follow these steps to have the product repaired or replaced.

Step 1: Submit your RMA request.

Go to www.siig.com, click Support, then RMA to submit a request to SIIG RMA. If the product is determined to be defective, an RMA number will be issued.

Step 2: After obtaining an RMA number, ship the product.

Properly pack the product for shipping. All software, cable(s) and any other accessories that came with the original package must be included.

Clearly write your RMA number on the top of the returned package. SIIG will refuse to accept any shipping package, and will not be responsible for a product returned without an RMA number posted on the outside of the shipping carton.

You are responsible for the cost of shipping the product to SIIG at the following address:

SIIG, Inc.

6078 Stewart Avenue Fremont, CA 94538 RMA #:

SIIG will ship the repaired or replaced product via Ground in the U.S and International Economy outside of the U.S at no cost to the customer.

15

Image 15
Contents SystemRequirements Features and BenefitsHardware Installation PackageContentsLayout RAID Arrays Hard Disk Drive ConnectionRAID 0 Striping RAID 1 Mirror To Rebuild the Mirror while in the Sata RAID Bios Rebuilding a Failed Mirror SetSelect Reserved for RAID, then press Enter Click Mirror Array, then click Tasks Deleting RAID ArraysWindows2000 Driver InstallationBios Configuration Low Level FormatPage WindowsXP/Server2003 Windows Vista At the Found New Hardware WizardClick Continue Anyway, then click Finish Windows Server Click Install this driver software anyway, then click Close To Verify Windows InstallationClick Next, Next, Next Windows 2000/XP/Server 2003 InstallationWindows Vista /Server 2008 Installation Initio Sata RAID Manager GUIBlank SIIG, Inc Stewart Avenue Fremont, CA 94538 RMA # Technical Support and WarrantyAbout SIIG, Inc