For An Existing Installation
1.Setup the RAID array prior to driver installation and boot up to Windows.
2.At the Found New Hardware window, click Locate and install the driver software (recommended).
3.ClickContinue. InsertthedriverCDwhenprompted.
4.At The software for this device has been successfully installed, click Close.
5.Restart Windows Vista to complete the installation.
When Windows resumes, go to Initio SATA RAID Manager GUI on page 13 and install the RAID utility.
Windows Server 2008
For A New Installation
1.Setup the RAID array prior to Windows installation.
2.Follow Microsoft Windows installation procedure.
3.At the Where do you want to install Windows screen, insert the driver CD, click Load Driver, then click Browse.
4.Double click your CD/DVD drive, select the Vista folder, then click OK.
5.Select Initio INIC1622
6.Continue with Windows Server 2008 operating system installation.
For An Existing Installation
1.Setup the RAID array prior to driver installation and boot up to Windows.
2.At the Found New Hardware window, click Locate and install the driver software (recommended).
3.Click Don't search online. Insert driver CD.
11