3.Select Create, then press Enter.
4.Select RAID 0, then press spacebar.
5.Select chunk size from 8k, 16k, 32k, 64k , 128k or 256k, then press spacebar.
6.Create name or leave blank, press Enter.
7.When asked Expand RAID 0 to maximum capacity, select No, then press Enter.
8.Select Exit, then press Enter.
9.When asked Are You Sure to Exit(Yes/No)?, select Yes, then press Enter to exit and reboot.
10.Continue with the Fdisk and Format steps as if you were installing a conventional hard drive.
RAID 1 (Mirror)
This RAID array to be used on New/Blank hard drives. Mirroring will destroy existing data on the hard drives.
1.As the BIOS boots press Ctrl+R when prompted to enter the RAID BIOS.
2.At the next screen select RAID , then press Enter.
3.Select Create, then press Enter.
4.At the next screen choose RAID1, then press spacebar.
5.Create name or leave blank, then press Enter.
6.When asked, Activate load balance for RAID 1 (Yes/No)?, select Yes, then press Enter.
7.Select Exit, then press Enter.
8.When asked Are You Sure to Exit(Yes/No)?, select Yes, then press Enter to exit and reboot.
9.Continue with the Fdisk and Format steps as if you were installing a conventional hard drive.
4