SIIG SATA II-150 specifications

4.At the Windows 2000 Setup screen, press F6 to install the RAID driver.

5.When prompted, press S to specify the location of the driver.

6.Insert the floppy disk, then press Enter.

7.Select Initio INIC162x S-ATA RAID Driver For Windows 2000, then press Enter.

8.Press Enter again continue and follow the on-screen instructions to complete the Windows installation. Do not remove the floppy disk until instructed.

When Windows installation completes, go toInitio SATA RAID Manager GUI on page 13 and install the RAID utility.

For An Existing Installation

1.Setup the RAID array prior to driver installation and boot up to Windows.

2.At Found New Hardware Wizard, click Next.

3.Select Search for a suitable driver for my device (recommended), then click Next.

4.InsertthedriverCD,checkCD-ROMdrives,uncheck the other boxes, click Next, then click Next again.

5.IftheDigitalSignatureNotFound messageappears, click Yes. Our driver has been thoroughly tested for stability and compatibility.

6.Click Next, then Finish.

7.Repeat step 5.

8.Restart Windows to complete the installation.

When Windows resumes, go to Initio SATA RAID Manager GUI on page 13 and install the RAID utility.

8