SIIG SATA II-150 specifications Hardware Installation, PackageContents, Layout

PackageContents

•SATA II-150 PCI RAID board

•2 SATA data cables and one dual-connector SATA power cable

•Spare low profile bracket

•Driver CD and Quick Installation Guide

Layout

HDD LED pins (Front chassis

LED; connects horizontally)

HDD

Activity

LEDs

Internal connectors

Figure 1. SATA II-150 PCI RAID

Hardware Installation

General instructions for installing the card are provided below. Since the design of computer cases and motherboards vary, refer to your computer’s reference manual for further information, if needed.

Static electricity discharge may permanently damage your system. Discharge any static electricity build up in your body by touching your computer’s case for a few seconds. Avoid contact with internal parts and handle cards only by their external edges.

2