User's Manual
1-1.1 Static Electricity Precaution
One of the routine precautions you must be aware of when working with computer components is the problem of static electricity discharge.
Note Leave the product in its
Caution Static electricity discharge may per- manently damage your system. In order to avoid possible static electricity discharge during installation procedures, please follow the guidelines below:
•Discharge any static electricity build up in your body by touching a large grounded metal surface or the computer’s case (if plugged in), for a few seconds.
•During installation procedures, avoid any contact with internal parts. Handle cards only by their edges.
1-1.2 Record the Serial Number
In order for SIIG's Technical Support or Customer Service Department to give you prompt service, you will need the following product information. The serial number label is located on the side of the box and on the back of the board.
Serial No. | Part No. |
S/N XXXXXXXXXXXX |
Please take a moment to record the serial number.
Serial Number: | _____________________________ |
Part Number: | _____________________________ |
Date purchased: | _____________________________ |