User's Manual
2-3.3 Driver Installation for Mac OS X
For a fresh OS X installation:
1.Install the UltraATA 133/100 Pro and attached drives.
2.Boot up your computer with the Mac OS X
3.When Mac OS finishes booting, click Install in the menu bar.
4.Click Open Disk Utility.
5.Click Drive Setup.
6.Highlight the drive connected to the UltraATA 133/100 Pro and click Partition. Be aware that, partitioning the drive will erase all information on this hard disk drive.
7.Click Partition to initialize drive.
8.Close Drive Setup utility when finished and continue with Mac OS X installation.
For systems that have OS X installed:
1.Install the UltraATA 133/100 Pro and attached drives.
2.Boot up your system. When Mac OS finishes booting, double click Mac OS X drive icon on the desktop.
3.Double click Applications folder.
4.Double click Utilities folder.
5.Double click Disk Utility icon.
6.Click Drive Setup button.
7.Highlight the drive connected to the UltraATA 133/100 Pro and click Partition. Be aware that, partitioning the drive will erase all information on this hard disk drive.
8.Click Partition to initialize the drive.
9.Close the Drive Setup utility when finished. The new drive should appear as Untitled on the desktop.