SIIG Introducing the UltraATA 133/100 Pro, Key Features and Benefits, System Requirements

Introduction

1-2 Introducing the UltraATA 133/100 Pro

The UltraATA 133/100 Pro is an ultra high-speed dual channel Ultra ATA/133 controller board for use with Power Macs. It achieves burst data transfer rates up to 133MB/sec and supports drive capacities greater than 137GB. And it also provides full backward support for Ultra ATA 100/66/33 hard drives. Enhanced BIOS auto-detects device types and fine tunes to the best performance for each connected hard drive.

1-2.1 Key Features and Benefits

•PCI Plug-n-play 2.2/2.1 compliant

•CRC error-checking provides data verification and achieves flawless data transfer

•Two independent IDE channels, supports up to four Ultra ATA hard drives and CD-R/RWs that support Adaptec Toast burning software (see drive compatibility list on www.siig.com)

•Breaks the 137GB barrier! Supports various types of large capacity hard disk drives

•Auto-detects drive types and fine tunes to the best performance for each Ultra ATA hard disk drives

•Full backward support for Ultra ATA 100/66/33 standards

•Supports Ultra DMA 0, 1, 2, 3, 4, 5, 6 and MultiWord DMA 0, 1, 2

•Achieves burst data transfer rates up to 133MB/sec when using Ultra ATA/133 hard drives

•Full support of ACPI for system power management

•3.3V operating voltage with 5V tolerant I/O

1-2.2 System Requirements

•PowerMac G3, G4, and Mac computers with an available PCI slot

•OS 8.6 or later

1-3