ISD300 User Manual
Using the ISD300 Homepage
Using the ISD300 Homepage
Initial installation, configuration and subsequent administration of the ISD appliances as well as management of the relevant network printers can be carried via the integrated web server (ISD300 Homepage). Administration is entirely independent of operating systems and locations, so it can be done from any workstation within the network.
Exception: With the ’Point and Print’ method the driver installation and editing of the user rights is adjusted via a Client PC.
Only versions of Netscape Navigator 4.0 or later and Microsoft Internet Explorer 4.0 or later are supported. For the display we recommend a resolution of 1024 x 768 Pixel at least.
After start the ISD300 Homepage the ’Login’ dialog appears. Access to the ISD300 Homepage is defined for three user groups.
Which information do you need?
•How to open the ISD300 Homepage?
•How to log on to the ISD300 Homepage?
•Structure of the ISD300 Homepage
How to open the ISD300 Homepage?
Before starting the ISD300 Homepage it is neccesary to assign an IP Address to the ISD300; see How to set TCP/IP Parameters? (IP, Netmask, Gateway)
1.Start your web browser.
2.Enter the IP address of the ISD300 as URL.
The ISD300 Homepage is displayed. If the Homepage is not displayed, check the proxy settings of your browser.
After the Homepage was started you have to log on; see: How to log on to the ISD300 Homepage? on page 11.
ISD300 User Manual | 10 |