ISD300 User Manual
Network Settings
3.Enter the Host name (max. 256 characters).
4.Click Set.
How to set Date and Time?
Date and time specifications are necessary if you want to display the time at which the print job was printed. Date and time specifications are displayed in the Job History.
Date and time can be entered manually during the Quick Setup also; see: How to configure via Quick Setup? on page 17.
Date and time can be adjusted manually or obtained from a time server.
If you use a time server, the manually entered time will be overwritten by the time provided by the time server.
Proceed as follows:
1.Click Configuration.
2.Click Board Settings.
3.Enter time and date or use a time server; see Table: Parameter Settings - Board.
4.Click Set.
Table: Parameter Settings - Board
Parameter | Description |
|
|
Default name | Default name of the ISD300 set by the manufacturer |
|
|
Host name | Host name of the ISD300 set by the administrator |
| (max. 256 characters) |
|
|
Date | Date in the format: dd.mm.yyyy (e.g. 23.05.2004) |
|
|
Time | Time in the format: hh:mm (e.g. 16:36) |
|
|
Time server | IP address or the host name of the time server |
| (e.g. ’ntp1.ptb.de’) The ’ntp’ protocol is used. |
|
|
ISD300 User Manual | 16 |