ISD300 User Manual
Maintenance
It is not necessary to delete the notification setup. The notification function can be switched of. Choose Disabled in the ’notification level’ list box.
How to update Firmware or Software?
ISD300 can be updated, simply receiving new firmware or software via the network.
During a firmware update, the old firmware is overwritten and replaced. The configuration parameters retain their original settings.
The ISD300 comes with the current firmware and software, so that an update is generally only required as bugfix.
Proceed as follows:
1.Click Maintenance.
2.Click Software.
3.Choose Install software on the ISD300.
4.Click Next.
5.Click Browse....
6.Select a firmware or software file.
7.Click Next to upload the file to the ISD300.
8.Click Next to apply the firmware or software to the ISD300.
9.Click OK.
The ISD300 may be rebooted automatically to activate the firmware or software.
How to create a Backup?
The system configuration can be stored in a backup file on another system. If required, the configuration then can be restored within seconds. This configuration can also be used to configure further ISD devices, to achieve consistent configuration and minimise installation times.
With the assistance of the Software Manage Wizard you can create a backup image of
-DHCP and DNS settings
ISD300 User Manual | 61 |