ISD300 User Manual
Printing methods
For further information about using IPP to address ISD300 to printers see: Types of Queues on page 31.
Socket Printing
It is possible to assign TCP ports in the range from 9100 to 9107 to print queues. By this way clients may send print jobs to the ISD300 via socket printing and address a queue.
Proceed as follows:
1.Click Queues/Jobs.
2.Click Sockets.
3.Select a queue for each TCP port.
4.Click Set.
The queue is assigned to the port number.
ThinPrint®
The ISD300 come with an integrated ThinPrint® server. Used as a gateway, the ISD appliances receive and decompress print jobs that have previously been compressed and optimised relating to the bandwidth required for their transmission via the ThinPrint technology. ThinPrint is primarily used in
The ISD300 receives jobs from a ThinPrint® server and sends the jobs to the network printer either via socket printing, IPP printing or LPD printing depending on the type of the queue.
For using the ISD300 in a ThinPrint® environment, a ThinPrint® ID must be assigned to each queue. This ID can be any numeric value from 0 to 400.
Proceed as follows:
1.Click Queues/Jobs.
2.Click ThinPrint®.
3.Enter the ThinPrint® ID.
4.Click Set.
ISD300 User Manual | 43 |