ISD300 User Manual
Network Settings
The Quick Setup involves four steps:
-general settings
-TCP/IP parameters
-the search for available printers in the network
-the setting up of queues
Proceed as follows:
1.Click Quick setup.
2.Enter the host name, date, and time.
3.Click Next to confirm.
4.Enter the TCP/IP parameter.
5.Click Next to confirm.
6.Enter a start and end IP address for the printer search. A maximum of 255 IP addresses can be searched through at a time.
7.Click Next to confirm.
You will get a message of the number of printers found in the network.
8.Click OK to confirm.
A list of printers is displayed.
9.Enter a name for the queues in the column Queue name; see: Queue Name Conventions on page 18.
10.Click Install.
The name of the queue appears dimmed in the column Queue name.
11.Click Finish setup.
Table: Queue Name Conventions
Queue Name Conventions
-letters and numbers are allowed
-hyphens and underscores are allowed
-no space characters
-no more than 32 characters (Windows 98 max. 15 characters)
ISD300 User Manual | 18 |