SEH Computertechnik ISD300 user manual Click Maintenance Click Certificate

ISD300 User Manual

Security

certificate issued by the certification authority. The root certificate is stored on an authentication server in the network.

Upon delivery, a self-signedcertificate (the so-called default certificate) is stored on the ISD300. If you set up encrypted printing via https the default certificate is used. It is recommended that you replace the default certificate by a self-signed certificate or CA certificate.

What do you want to do?

•Creating a self-signed certificate

•Creating a CA certificate

•Deleting certificates

Creating a self-signed certificate

Certificates can be created by administrators only. If a certificate has already been saved on the ISD300, the content of this certificate will be displayed. In this case you have to delete the existing certificate first; see: Deleting certificates on page 55.

Proceed as follows:

1.Click Maintenance.

2.Click Certificate.

3.Enter the data; see: Parameter Settings - Certificates on page 53.

4.Choose Create self-signed certificate.

5.Click Create.

The certificate is created and installed.

Table: Parameter Settings - Certificates

Parameter	Description
Common name	Is used to clearly identify the certificate. It is
	advisable to use the IP address or the host name of
	the print server to allow a clear assignment of the
	certificate to the print server. You can enter a
	maximum of 64 characters.

ISD300 User Manual 53