B
SECURING IN PLACE (ADJUSTER ADJUSTMENT)
Be sure to have all the Adjusters make contact with a flat surface. Unless the Adjusters come into contact with a flat surface, the Cabi- net can move of itself, causing an accident.
This machine has 4 casters and 4 adjusters (shown below). When the installation position is determined, make sure that the machine position is level, bring the adjusters into direct contact with the floor, and make adjustments so that the casters will be raised approximately 5mm. from the floor.
1Move the machine to the installation position. Be sure to provide adequate space allowing the player to get on and off.
2Have all of the leg adjusters make contact with the floor. Adjust the height of the leg adjusters by using a wrench so that the machine’s position is kept level.
3After making adjustments, fasten the leg adjuster nut upward and secure the height of the leg adjuster.
12