Select Products II manual 21091

Page 19

Follow these steps to install the hanger bracket.

1.Disconnect AC power from the power supply.

2.Place the power supply on its side on a flat surface.

3.Position the brackets as shown below.

4.Attach the bracket using a 3/16" Allen wrench and the supplied screws.

Note: Use the supplied thumb screws to clamp the hanger brackets to the desired pipe or truss.

Figure 6

YLPPUS

REWOP

 

 

YAW 21

 

 

21091

Figure 10

19

Image 19
Contents Page Contents Page Coloram II System IntroductionColor changers and other components Coloram II System ComponentsColoram II Power Supply menu Power SupplyColoram II Cable Menu Details Power UP ScreensRUN Screen Loop Alerts / Error MessagesFor the Coloram II color changer XX UnitsFor the CXI color changer For the Goboram Setup Options 001 +001 + + CommandsMount the power supply Installing / Connecting the Coloram II Power SupplyConnect the color changers to the power supply Set the Power Supply/Color Changer Channels Connect the Power Supply to AC powerHead-Feet Restrictions Connect and set the DMX512 sourcePower Supply hanger brackets Mounting and installation accessoriesHead-Feet Example 21091 Power supply rack mounting Cables Coloram II Cable Equipment CompatibilityDMX512 control cable Specifications Coloram II Power SupplySoftware Version Changes Parts listColoram II Power Supplies Coloram II mounting and installation accessoriesColoram II Cable Warranty information