DMX512 control cable

The DMX control cable from the lighting board to the power supply is a five conductor cable with 5-pin XLR connectors on each end. The wiring pin out is specified by the USITT DMX512/1990 standard.

XLR Pin # Function

1Common

2Data -

3Data +

4Talkback -

5Talkback +

Specifications

The Coloram II Power Supply

Connectors:

DMX in: Male 5-pin XLR

DMX out: Female 5-pin XLR

Coloram output: Female 4-pin XLR DMX512 termination: Terminated and regenerated Fuse:

24-Way Power Supply - model 19000):

7 amp slo blo at 115 VAC

4 amp slo blo at 230 VAC

12-Way Power Supply (model 19012):

4 amp slo blo at 115 VAC

2 amp slo blo at 230 VAC

6-Way Power Supply (model 19060):

2 amp slo blo at 115 VAC

1 amp slo blo at 230 VAC

Input Power: Automatically accepts 100 - 132 VAC 50/60 Hz and 170 - 240 VAC 50/60Hz

Input Signal: 1990 USITT standard DMX512

LED display: Indicates power, signal, system status, and is used to configure the system

Power loss DMX bypass relay: Yes

Size:

24 Way Power Supply:

14.66"/372.5mm L x 8.16"/207.4mm W x 5.34"/135.6mm H

12 Way Power Supply:

13.75"/349.2mm L x 7.85"/199.4mm W x 4.05"/102.9mm H

6 Way Power Supply:

12.45"/316.2mm L x 7.60"/193.1mm W x 3.65"/92.7mm H