Select Products manual Introduction, Coloram II System

Page 4

Introduction

The Coloram II System consists of scrolling color changers, mixing color changers, dowsers, other products and power supplies in a wide range of models offering ease of setup and use. Its color changing capability and DMX compatibility affords the designer wide capability and versatility. The lightweight color changers slide easily into the gel frame holder of the light fixture. The compact power supplies attach easily to the truss of the lighting rig or mount into a 19-inch rack.

The Coloram II System

The Coloram II System consists of one or more Color Changers or other components and a remote power supply. The DMX512 control signal from the lighting board is connected to the power supply and can continue on to more Coloram II Power Supplies or other DMX-controlled devices. The power supply sends both power and control signal on a single cable eliminating the need for a separate power cable for each color changer.

The Coloram II System also allows you to control the color changer fan speed via one or multiple DMX channels on the lighting console.

The Coloram II System is equipped with the Intelligent Diagnostic System (IDS). Status information is sent from each of the Coloram II Color Changers to the Coloram II Power Supply.

Caution: The Coloram II System is not compatible with the Forerunner System. Do not connect Coloram II Color Changers to Forerunner Power Supplies, or Forerunner Color Changers to Coloram II Power Supplies. Damage from such action will not be covered by the Coloram II or Forerunner warranties.

4

Image 4
Contents Page Contents Page Introduction Coloram II SystemColoram II System Components Color changers and other componentsColoram II Power Supply menu Power SupplyColoram II Cable Power UP Screens Menu DetailsAlerts / Error Messages RUN Screen LoopXX Units For the Coloram II color changerFor the CXI color changer For the Goboram Setup 001 + OptionsCommands 001 + +Mount the power supply Installing / Connecting the Coloram II Power SupplyConnect the color changers to the power supply Connect the Power Supply to AC power Set the Power Supply/Color Changer ChannelsConnect and set the DMX512 source Head-Feet RestrictionsPower Supply hanger brackets Mounting and installation accessoriesHead-Feet Example 21091 Power supply rack mounting Equipment Compatibility Cables Coloram II CableSpecifications Coloram II Power Supply DMX512 control cableParts list Coloram II Power SuppliesColoram II mounting and installation accessories Software Version ChangesColoram II Cable Warranty information