Savin 25105 Connect Copy, When Memory is Full, 280, See ⇒ P.320 Adjust Image

What to do if Something Goes Wrong

Connect Copy

Machine Status	Cause	Action
You can not use the Punch	The sub-unit does not have	Press the [Connect Copy]
function.	the optional punch kit.	key to disconnect, then
		start copying.
The copied images differ.	The “Original Mode” of the	See ⇒ P.320 “Adjust Image”
	user tools (Copy Features)
	settings are not the same.
	The user stamp settings are	Register the same stamp in
	not the same on the master	each user stamp.
	unit and sub-unit.

	When Memory is Full
5
	If the number of originals exceeds a certain limit, the machine will run out of
	memory, for Connect Copy scans in all your originals into memory.

Limitation

❒If memory is full on either the master unit or sub-unit, Interrupt will not be available.

Note

❒If you set the “Memory Full Auto Scan Restart” setting in the User Tools (Copier/Document Server Features) to “Yes”, the memory overflow message will not be displayed, but originals scanned so far will be copied automatical- ly. Connect Copy continues scanning and copying until finishing the job. Please note that copy sets will be printed out separated by scanning at this time.

Machine Status	Action
The memory is full.	Press the [Output] key to copy scanned
	originals and clear the scanning data.
	Press the [Clear] key to clear the scanning
	data and not copy.
The machine asks you whether you want	To continue copying, remove all copies
to scan the remaining originals.	then press the [Resume] key. To stop copy-
	ing, press the [Cancel] key.

280