Savin 25105 operating instructions Copy settings, Yet, Progress, 270

Page 7

What to do if Something Goes Wrong

Machine Status	Cause	Action

The [Connect] key does not	The master unit is in Preset	Exit Preset Jobs mode in
appear on the display.	Jobs mode.	one of the following ways.

		❖ If you are still selecting
		copy settings and
		copying has not started
		yet :
		Press the [Clear] key
		then remove the origi-
		nals set in the master
		unit document feeder.
		❖ If Preset Jobs mode is
		in progress :
		Press the {Stop}key,
		follow the instructions
		on the display then
		press the [Cancel] key.
		Reference
		See “Preset Jobs” ⇒
		P.60 “Job Preset”

The [Connect] key does not	The “Connect Copy” of	Change the setting to
appear on the display.	User Tools setting is set to	“Yes” or press the [Con-
	“No”.	nect] key on the other unit.
		Reference
		See “Connect Copy” ⇒
		P.269 “Connect Copy”

	The Connect Copy cable is	Please contact your service
	damaged.	representative.

	L indicator is lit.	Follow the instructions
		shown on the display.

270

Image 7

Contents Copy Reference General If Your Machine Does Not Operate as You Want265 Tures Document Server266 Ty ⇒ P.314 General FeaIng Misfeeds Connect Copy267 Ing the Toner BottleCopy 268269 DisplayComponents 270 Copy settingsYet ProgressServer 271272 If Connect Copy is Cleared273 If You Cannot Exit Connect Copy274 275 If You Cannot Make Clear Copies276 If You Cannot Make Copies As You WantCombine Adjust Image277 278 DuplexOriginal Orientation Lete User Stamp StampDocument Server 279280 When Memory is FullSee ⇒ P.320 Adjust Image Connect CopyTo load paper in tray 1 Tandem Tray Loading Paper281 When the left half of the tray is pulled out When the whole tray is pulled out282 283 Loading paper in Tray 2 or284 Loading Paper in the Large Capacity Tray285 Loading Paper in the Optional A3/11 × 17 Tray Kit286 Changing the Toner Bottle287 288 289 Clearing Misfeeds290 291 292 293 294 295 296 Changing the Paper SizeChanging the paper size in Tray Changing the paper size in Tray 2 and Tray297 298 299 300 301 Adding Staples302 303 304 Removing Jammed Staples305 306 307 Removing Punch Waste308 309 Accessing User Tools Copier/Document Server Features310 See ⇒ P.314 Settings You Can Change with the User Tools311 Exiting User Tools312 User Tools Menu Copier/Document Server Features313 314 Settings You Can Change with the User ToolsGeneral Features General Features315 Set Ratio Original Mode Level316 317 318 Display/Panel Tone319 320 Default Image Back Of Cover321 322 323 Default Left to Right324 Background Numbering325 Preset Stamp326 User Stamp327 Default 01/01/2000Default Auto Select Date Stamp328 Default Opposite PositionDefault Per Original NumberingCenter 329330 Default 10 secondsDefault Original is Set Input/Output331 Document Server Default Time Sort DescendingDefault Store And Print Default Do Not Delete333 Key Operator ToolsPress the Delete User Code key 334335 Dos And DontsEnvironments To Avoid Where to Put Your MachineMachine Environment Optimum Environmental ConditionsAccess to Machine Power Connection337 Maintaining Your Machine Cleaning the Exposure GlassCleaning the Document Feeder Cleaning the machine339 Stapling Position340 Mainframe Reproduction ratio Non-reproduction areaFirst copy time Copying speedMaximum number of continuous copy sets Power consumption Type 1 85copies/minute modelPower consumption Type 2 105copies/minute model Dimensions W × D × H up to exposure glassNoise Emission *1 Type Weight344 Mode Original weightPower Source Document FeederFinisher 347 CD-R/RW OptionStorage Number of files Maximum number of writes/deletes348 A3/11 × 17 Tray Kit Option349 Punch Kit Option350 Dimensions W × D × H, option unitLarge Capacity Tray LCT Option Paper capacity351 Copy Connector Cable OptionContinuous copying speed Length352 IndexBackground Numbering 353354

Machine Status

copy settings and

yet :

in progress :

Reference

P.60 “Job Preset”

Reference

P.269 “Connect Copy”

270