Savin 25105 operating instructions If Your Machine Does Not Operate as You Want, General, 265

5.What to do if Something Goes Wrong

If Your Machine Does Not Operate as You Want

General

Machine Status	Problem/Cause	Action
The machine instructs you	The machine is warming	Wait for the machine to
to wait.	up.	warm-up.
		Reference
		You can use Auto Start
		mode during warm-up.
		See ⇒ P.69 “Auto Start”.
	Copy paper is moving in	Please wait until paper has
	tray 1 (Tandem Tray).	moved.
The machine cannot detect	Improper original is set.	Set non-standard size orig-
the original size.	See ⇒ P.16 “Sizes Difficult to	inals on the exposure
	Detect”.	glass.
		Input the both horizontal
		and vertical sizes of the
		non-standard original. See
		⇒ P.26 “Setting Originals
		on the Exposure Glass”.
		Select paper manually. Do
		not use Auto Paper Select.
		Do not use Auto Reduce/
		Enlarge.
	Original is not set.	Set your originals.
The machine instructs you	There is no copy paper that	Set the original in the same
to check the original direc-	is the same direction as the	direction as the copy pa-
tion.	originals.	per.
The machine instructs you	Improper original size is	Select the proper paper
to check the paper size.	set.	size.
Staple mode has been reset.	The paper size was	You can only staple to-
	changed during stapling.	gether pages of the same
		size. Select copy paper of
		the same size.

265