Savin 25105 operating instructions Power Connection, Access to Machine, 337

Page 74

Where to Put Your Machine

Power Connection

RWARNING:

•Only connect the machine to the power source described on the inside front cover of this manual. Connect the power cord directly into a wall outlet and do not use an extention cord.

•Do not damage, break or make any modifications to the power cord. Do not place heavy objects on it. Do not pull it hard nor bend it more than necessary. These actions could cause an electric shock or fire.

RCAUTION:

•Unplug the power cord from the wall outlet before you move the equipment. While moving the equipment, you should take care that the power cord will not be damaged under the equipment.

RCAUTION:

•When you disconnect the power plug from the wall outlet, always pull the plug (not the cable).

•When the main switch is in the Stand-by position, the optional anti-conden- sation heaters are on. In case of emergency, unplug the machine's power cord.

•When you unplug the power cord, the anti-condensation heaters turn off.

• Make sure the plug is firmly inserted in the outlet.	7

• Voltage must not fluctuate more than 10 %.

Access to Machine

Place the machine near the power source, providing clearance as shown.

1. Rear: more than 20cm (7.8")	3.
2. Right: more than 3cm (1.1")	4.

Note

Front: more than 55.5cm (21.6")

Left: more than 40cm (15.7")

❒For the required space when options are installed, please contact your service

representative.

337

Image 74

Contents Copy Reference 265 If Your Machine Does Not Operate as You WantGeneral Ty ⇒ P.314 General Fea Document Server266 TuresIng the Toner Bottle Connect Copy267 Ing Misfeeds268 CopyComponents Display269 Progress Copy settingsYet 270271 ServerIf Connect Copy is Cleared 272If You Cannot Exit Connect Copy 273274 If You Cannot Make Clear Copies 275If You Cannot Make Copies As You Want 276277 Adjust ImageCombine Original Orientation Duplex278 279 StampDocument Server Lete User StampConnect Copy When Memory is FullSee ⇒ P.320 Adjust Image 280281 Loading PaperTo load paper in tray 1 Tandem Tray 282 When the whole tray is pulled outWhen the left half of the tray is pulled out Loading paper in Tray 2 or 283Loading Paper in the Large Capacity Tray 284Loading Paper in the Optional A3/11 × 17 Tray Kit 285Changing the Toner Bottle 286287 288 Clearing Misfeeds 289290 291 292 293 294 295 Changing the paper size in Tray 2 and Tray Changing the Paper SizeChanging the paper size in Tray 296297 298 299 300 Adding Staples 301302 303 Removing Jammed Staples 304305 306 Removing Punch Waste 307308 Accessing User Tools Copier/Document Server Features 309See ⇒ P.314 Settings You Can Change with the User Tools 310Exiting User Tools 311User Tools Menu Copier/Document Server Features 312313 General Features Settings You Can Change with the User ToolsGeneral Features 314315 316 Original Mode LevelSet Ratio 317 Display/Panel Tone 318319 Default Image Back Of Cover 320321 322 Default Left to Right 323Background Numbering 324Preset Stamp 325User Stamp 326Date Stamp Default 01/01/2000Default Auto Select 327Numbering Default Opposite PositionDefault Per Original 328329 CenterInput/Output Default 10 secondsDefault Original is Set 330331 Default Do Not Delete Default Time Sort DescendingDefault Store And Print Document ServerKey Operator Tools 333334 Press the Delete User Code keyDos And Donts 335Optimum Environmental Conditions Where to Put Your MachineMachine Environment Environments To Avoid337 Power ConnectionAccess to Machine Cleaning the machine Cleaning the Exposure GlassCleaning the Document Feeder Maintaining Your MachineStapling Position 339340 Mainframe Copying speed Non-reproduction areaFirst copy time Reproduction ratioDimensions W × D × H up to exposure glass Power consumption Type 1 85copies/minute modelPower consumption Type 2 105copies/minute model Maximum number of continuous copy sets344 WeightNoise Emission *1 Type Document Feeder Original weightPower Source ModeFinisher Maximum number of writes/deletes CD-R/RW OptionStorage Number of files 347A3/11 × 17 Tray Kit Option 348Punch Kit Option 349Paper capacity Dimensions W × D × H, option unitLarge Capacity Tray LCT Option 350Length Copy Connector Cable OptionContinuous copying speed 351Index 352353 Background Numbering354