Savin 25105 operating instructions Removing Jammed Staples, 304

Page 41

What to do if Something Goes Wrong

eRemoving Jammed Staples

Important

❒After removing jammed staples, always carry out step 10 and 11. If you do not do this, the stapler cartridge could be damaged.

Note

❒Staples might be jammed because of curled copies. In this case, try turning the copy paper over in the tray. If there is no improvement, change to copy paper with less curl.

❒After removing jammed staples, staples might not be ejected the first few times you try to use the stapler.

		• 1: Open the front cover of the finisher.
	5	• 2: Pull lever R8 and fully pull out the
		staple unit.
		• 3: Turn knob R9 until the marks are
		• 3: Turn knob R9 until the marks are
		aligned.
		• 4: Turn knob R9 more and raise the sta-
		ple unit towards you.

• 5: Pull out the staple unit lever.

• 6: Pull out the staple unit gently.

304

Image 41

Contents Copy Reference 265 If Your Machine Does Not Operate as You WantGeneral 266 Document ServerTy ⇒ P.314 General Fea Tures267 Connect CopyIng the Toner Bottle Ing MisfeedsCopy 268Components Display269 Yet Copy settingsProgress 270Server 271272 If Connect Copy is Cleared273 If You Cannot Exit Connect Copy274 275 If You Cannot Make Clear Copies276 If You Cannot Make Copies As You Want277 Adjust ImageCombine Original Orientation Duplex278 Document Server Stamp279 Lete User StampSee ⇒ P.320 Adjust Image When Memory is FullConnect Copy 280281 Loading PaperTo load paper in tray 1 Tandem Tray 282 When the whole tray is pulled outWhen the left half of the tray is pulled out 283 Loading paper in Tray 2 or284 Loading Paper in the Large Capacity Tray285 Loading Paper in the Optional A3/11 × 17 Tray Kit286 Changing the Toner Bottle287 288 289 Clearing Misfeeds290 291 292 293 294 295 Changing the paper size in Tray Changing the Paper SizeChanging the paper size in Tray 2 and Tray 296297 298 299 300 301 Adding Staples302 303 304 Removing Jammed Staples305 306 307 Removing Punch Waste308 309 Accessing User Tools Copier/Document Server Features310 See ⇒ P.314 Settings You Can Change with the User Tools311 Exiting User Tools312 User Tools Menu Copier/Document Server Features313 General Features Settings You Can Change with the User ToolsGeneral Features 314315 316 Original Mode LevelSet Ratio 317 318 Display/Panel Tone319 320 Default Image Back Of Cover321 322 323 Default Left to Right324 Background Numbering325 Preset Stamp326 User StampDefault Auto Select Default 01/01/2000Date Stamp 327Default Per Original Default Opposite PositionNumbering 328Center 329Default Original is Set Default 10 secondsInput/Output 330331 Default Store And Print Default Time Sort DescendingDefault Do Not Delete Document Server333 Key Operator ToolsPress the Delete User Code key 334335 Dos And DontsMachine Environment Where to Put Your MachineOptimum Environmental Conditions Environments To Avoid337 Power ConnectionAccess to Machine Cleaning the Document Feeder Cleaning the Exposure GlassCleaning the machine Maintaining Your Machine339 Stapling Position340 Mainframe First copy time Non-reproduction areaCopying speed Reproduction ratioPower consumption Type 2 105copies/minute model Power consumption Type 1 85copies/minute modelDimensions W × D × H up to exposure glass Maximum number of continuous copy sets344 WeightNoise Emission *1 Type Power Source Original weightDocument Feeder ModeFinisher Storage Number of files CD-R/RW OptionMaximum number of writes/deletes 347348 A3/11 × 17 Tray Kit Option349 Punch Kit OptionLarge Capacity Tray LCT Option Dimensions W × D × H, option unitPaper capacity 350Continuous copying speed Copy Connector Cable OptionLength 351352 IndexBackground Numbering 353354