Savin 25105 operating instructions Display, 269, Components

If Your Machine Does Not Operate as You Want

Display

Problem	Cause	Action
The display panel is off.	The screen contrast is set	Turn the screen contrast
	too dark.	knob to adjust the contrast.
	The machine is in Energy	Press the {Energy Saver}
	Saver mode.	key to exit Energy Saver
		mode.
	The operation switch is	Turn on the operation
	turned off.	switch.
Nothing happens when the	The main power switch is	Turn on the main power
operation switch is turned	turned off.	switch. See ⇒ P.5 “Guide to
on.		Components”
	The circuit breaker has cut	Call your service represen-
	out.	tative.
			5
Connect Copy
Machine Status	Cause	Action
The [Connect] key does not	The main power switch on	Turn on the sub-unit main
appear on the display.	the sub-unit is off.	power switch.
	The operation switch on the	Press the operation switch
	sub-unit is off.	on the right side of the op-
		eration panel. The On indi-
		cator will light.
		Note
		❒ The machine will be
		ready to operate about
		five minutes after turn-
		ing power on.
	The master unit is not in	Press the {Copy}key on
	Copy mode.	the master unit to switch to
		the copy function.
	The master unit is in Inter-	Press the {Interrupt}key on
	rupt mode.	the master unit to exit In-
		terrupt mode.

269