2
16
User Tools (System Settings)
Settings You Can Change with the User Tools
For details on how to display the settings, see p.13 “Accessing the User Tools (System Settings)”.
General Features 1/3
❖Fusing Adjustment: Paper Tray
Specifies the characteristics of the paper roll in the paper tray. If the image on copies is scratched, or the paper wrinkles when using translucent paper, you can change the setting to get better copies.
You can specify separate settings for Plain, Translucent paper, and Film.
Note
❒Default: 3
❒The paper thickness can be set from 1 (Thicker) to 5 (Thinner).
❒Refer to the chart below when selecting the mode for the paper thickness.
Mode | 1 | 2 | 3 | 4 | 5 | |
Paper Type |
|
|
|
|
| |
|
|
|
|
|
|
|
Plain paper | 110g/m2 | 90g/m2 | 70g/m2 | 60g/m2 | 50g/m2 | |
|
| (29.3 lb) | (23.9 lb) | (Standard | (15.9 lb) | (13.3 lb) |
|
|
|
| mode) |
|
|
|
|
|
| (18.6 lb) |
|
|
|
|
|
|
|
|
|
Translucent | 70 – 90g/m2 | 70 – 80g/m2 | 70 – 80g/m2 | 50 – 70g/m2 | ||
paper | (18.6 – 29.3 lb) | (18.6 – 21.3 lb) | (18.6 – 21.3 lb) | (13.3 – 18.6 lb) | ||
|
|
|
| (Standard |
| *1 |
|
|
|
| mode) |
|
|
|
|
|
|
|
|
|
|
| * If the paper wrinkles when using mode 3, |
|
| ||
|
| try using mode 2 or mode 1. |
|
|
| |
|
|
|
|
|
|
|
Film | 0.07mm – | 0.07mm – | 0.07mm – | 0.07mm – | — | |
|
| 0.095mm | 0.095mm | 0.095mm | 0.095mm |
|
|
| (2.8 Mil – 3.7 | (2.8 Mil – 3.7 | (2.8 Mil – 3.7 | (2.8 Mil – 3.7 |
|
|
| Mil) | Mil) | Mil) (Stand- | Mil) (Stand- |
|
|
|
|
| ard mode) | ard mode) |
|
|
|
|
|
|
|
|
*1 Out of guarantee
❒Depending on the type of paper and the operating conditions, the toner
fusing condition changes. To improve the toner fusing, change the mode setting to 3→2→1.
❒When using thin paper, or soft, limp paper, the toner fusing may be wrin-
kled or the image may be blurred. In these cases, change the setting to mode 3→4→5.
❒When using Film, do not set to mode 5.