Savin 4700WD General Features 2/3, Original Feed Delay, Function Reset Timer, System Reset Timer

Page 33

DolphinGB-Syst-F_V4_FM.book Page 21 Wednesday, May 2, 2001 1:19 PM

Settings You Can Change with the User Tools

General Features 2/3

❖Original Feed Delay 1

Specifies the length of the delay before an original is fed into the machine after it has been set. If the originals are frequently fed at a slant, or you are using special originals, set the delay to an appropriate setting.

Note

❒Default: 1 second

❒The time can be set from 1 to 5 seconds.

❖Original Feed Delay 2

Specifies the length of the pause immediately after the originals are first fed into the machine. If the originals are frequently fed at a slant, or you are using special originals, set the delay to an appropriate setting.

Note

❒Default: 1 second

❒The time can be set from 0 to 5 seconds.

❖Function Reset Timer

Specifies the length of the delay in switching from Copier function to the Printer function, when the machine receives a print job.

• Instant

• Set Time (3-30 seconds)

Note

❒Default: 3 seconds

❒The time can be set from 3 to 30 seconds.

❖System Reset Timer

After copying, or no other key operations are performed, the machine dis- plays the function selected in the Function Priority setting after a specified pe- riod. This is called a System Reset. This setting specifies the time interval for the System Reset function.

Note

❒Default: 60 seconds

❒The time can be set to 0 and from 10 to 999 seconds.

❒If this setting is set to 0, the System Reset function is turned off.

2

21

Page 32 Page 34
Image 33
Page 32 Page 34
Contents System Settings Means Power ON. c means Stand by Introduction Introduction Introduction Means Power ON. c means Stand by Auto Off mode Copier only Low Power modeSleep mode Printer installed Energy Star ProgramRecycled paper SpecificationSymbols How to Read this ManualGuide to Option Components Terms in this ManualTable of Contents Page Manuals for This Machine Copier Function What You Can Do with This MachinePrinter Function Scanner FunctionPress the Total Counter key CountersPage Operation Panel Combined Function OperationsStart key Switching between Functions Interrupting Other Functions to Use Copier Functions Using the Machine as a CopierSwitching to Printer Mode Using the Machine as a PrinterSwitching to Scanner Mode Using the Machine as a ScannerMulti-access Combined Function Operations Accessing the User Tools System Settings User Tools System SettingsExiting from the User Tools User Tools Menu System Settings Settings You Can Change with the User Tools General Features 1/3Fusing Adjustment Paper Tray Original Size Detect Bypass Tray Paper TypeMetric version Inch versionTray Paper Size Tray Paper Type Paper Volume SettingOriginal Output Tray Copy Output TrayPaper Edge Hold Original Feed Delay General Features 2/3Function Reset Timer System Reset TimerCalculating the Correction Value % Fine Magnification CopierAuto Paper Roll Switching Panel Tone General Features 3/3Ready Tone Copy Count DisplayDate/Time Key Operator Tools Optional Hard Disk Index DolIndex Page 29 Thursday, July 19, 2001 322 PM Memo
Top Page Image Contents