Savin 4700WD General Features 3/3, Panel Tone, Ready Tone, Copy Count Display, Panel Off Level

Page 36

DolphinGB-Syst-F_V4_FM.book Page 24 Wednesday, May 2, 2001 1:19 PM

User Tools (System Settings)

General Features 3/3

Panel Tone

Specifies whether or not the machine should emit a tone when the keys on the panel are pressed.

• On

 

 

2

• Off

Note

Default: On

Ready Tone

Specifies whether or not the machine should emit a tone when the "Ready" message is displayed.

• On

• Off

Note

Default: On

Copy Count Display

Specifies the type of display for the copy count.

If you press the [Up] key, the display counts upwards, if you press the [Down] key, the display counts downwards.

• Up

• Down

Note

Default: Up

Panel Off Level

Specifies the energy saving level for when the machine enters standby mode.

Note

Default: Level 2

The level can be set from 1 to 4.

Level

Energy saving

Warm-up time

 

 

 

Standby level 1

Compared to normal operation, approx. 0%

Approx. 0 sec. *1

 

reduction

 

 

 

 

Standby level 2

Compared to normal operation, approx. 10%

Approx. 0 sec. *1

 

reduction

 

 

 

 

Standby level 3

Compared to normal operation, approx. 20%

Approx. 0 sec. *1

 

reduction

 

 

 

 

Standby level 4

Compared to normal operation, approx. 30%

Approx. 0 sec. *1

 

reduction

 

 

 

 

*1 If the warm-up time is set to 0 seconds, it will take longer to print continuous

24copy jobs. (Continuous copying speed reduction.)

Image 36
Contents System Settings Means Power ON. c means Stand by Introduction Introduction Introduction Means Power ON. c means Stand by Low Power mode Auto Off mode Copier onlySleep mode Printer installed Energy Star ProgramSpecification Recycled paperHow to Read this Manual SymbolsTerms in this Manual Guide to Option ComponentsTable of Contents Page Manuals for This Machine What You Can Do with This Machine Copier FunctionPrinter Function Scanner FunctionCounters Press the Total Counter keyPage Combined Function Operations Operation PanelStart key Switching between Functions Using the Machine as a Copier Interrupting Other Functions to Use Copier FunctionsUsing the Machine as a Printer Switching to Printer ModeUsing the Machine as a Scanner Switching to Scanner ModeMulti-access Combined Function Operations User Tools System Settings Accessing the User Tools System SettingsExiting from the User Tools User Tools Menu System Settings Settings You Can Change with the User Tools General Features 1/3Fusing Adjustment Paper Tray Bypass Tray Paper Type Original Size DetectMetric version Inch versionTray Paper Size Paper Volume Setting Tray Paper TypeOriginal Output Tray Copy Output TrayPaper Edge Hold General Features 2/3 Original Feed DelayFunction Reset Timer System Reset TimerFine Magnification Copier Calculating the Correction Value %Auto Paper Roll Switching General Features 3/3 Panel ToneReady Tone Copy Count DisplayDate/Time Key Operator Tools Optional Hard Disk Index DolIndex Page 29 Thursday, July 19, 2001 322 PM Memo