Savin 4700WD Using the Machine as a Copier, Interrupting Other Functions to Use Copier Functions

Page 20

DolphinGB-Syst-F_V4_FM.book Page 8 Wednesday, May 2, 2001 1:19 PM

Combined Function Operations

Using the Machine as a Copier

 

 

Switching to Copier Mode

1

 

 

 

When the printer or scanner function is not using, or finished, the copier screen to be displayed normally.

Reference

For details about using the copier functions, see the Copy Reference manual.

Interrupting Other Functions to Use Copier Functions

You can interrupt a copy job, or another function job, and switch to the copier function. This is called "Interrupt Copy."

Limitation

You cannot use the following functions with the interrupt copy function.

Edit Image

Stamp

Sort/Rotate sort

Erase

Reference

For details on using interrupt copy during a copy job, see "Interrupt Copy" in the Copy Reference manual.

A Press the {Interrupt} key while an original is being scanned or while a job is being

copied. When printing, place your originals after pressing the {Interrupt} key.

The Interrupt copier screen is displayed.

B Set your desired settings, and make the copies.

C When copying has finished, remove the originals and the copy output of the interrupt copy job.

D Press the {Interrupt} key.

8

Image 20
Contents System Settings Means Power ON. c means Stand by Introduction Introduction Introduction Means Power ON. c means Stand by Low Power mode Auto Off mode Copier onlySleep mode Printer installed Energy Star ProgramSpecification Recycled paperHow to Read this Manual SymbolsTerms in this Manual Guide to Option ComponentsTable of Contents Page Manuals for This Machine What You Can Do with This Machine Copier FunctionPrinter Function Scanner FunctionCounters Press the Total Counter keyPage Combined Function Operations Operation PanelStart key Switching between Functions Using the Machine as a Copier Interrupting Other Functions to Use Copier FunctionsUsing the Machine as a Printer Switching to Printer ModeUsing the Machine as a Scanner Switching to Scanner ModeMulti-access Combined Function Operations User Tools System Settings Accessing the User Tools System SettingsExiting from the User Tools User Tools Menu System Settings Fusing Adjustment Paper Tray Settings You Can Change with the User ToolsGeneral Features 1/3 Bypass Tray Paper Type Original Size DetectMetric version Inch versionTray Paper Size Paper Volume Setting Tray Paper TypePaper Edge Hold Original Output TrayCopy Output Tray General Features 2/3 Original Feed DelayFunction Reset Timer System Reset TimerFine Magnification Copier Calculating the Correction Value %Auto Paper Roll Switching General Features 3/3 Panel ToneReady Tone Copy Count DisplayDate/Time Key Operator Tools Optional Hard Disk Index DolIndex Page 29 Thursday, July 19, 2001 322 PM Memo