Settings You Can Change with the User Tools
❖Panel Off Timer
After copying, or no other key operations, have been performed the machine switches to standby mode after a specified period.
•0, 10 – 999 sec.
•60 sec.
| Note | 2 | |
❒ | Default: 60 seconds | ||
|
❒The time can be set to 0 and from 10 to 999 seconds.
❒If this setting is set to 0, the machine will not switch to standby mode.
❖Energy Saver Timer
After copying, or no other key operations have been performed, the machine switches to energy saver mode after a specified period.
Note
❒Default: 15 minutes
❒The time can be set from 1 to 240 minutes.
❖Weekly Output Volume
Specifies the amount of paper used per week.
The machine adjusts the toner density according to this amount. Five paper rolls is approximately 750m (2500ft).
• Metric version
•Less than 750m
•More than 750m
•Inch version
•Less than 2500ft
•More than 2500ft
Note
❒Default:
•Metric version: Less than 750m
•Inch version: Less than 2500ft
Date/Time
❖Date
Set the date for the machine's internal clock.
❖Time
Set the time for the machine's internal clock.
25