3. TRANZ 460 Terminal
Installation
Single Terminal Configuration
This application can operate in either of two configurations, both using a single telephone line. One configuration consists of a TRANZ 460 terminal and a standard telephone sharing the same telephone line. The other configuration supports up to five terminals per phone line, using a
In a single terminal configuration, there are two
Follow these steps to connect your TRANZ 460 terminal to the printer and to the DVM device. Refer also to Appendix F, TRANZport 232, for more complete details of the various serial interface and power cables available to install your DDOV TRANZ 460 terminal. Figures
Note: In the following configuration the TRANZ 460 receives its power from the TRANZport 232. The power pack that came with your TRANZ 460 should be used with the TRANZport 232.
Data Connections 1. Using one of the supplied serial interface cables (PN
2.Plug the
TRANZport 232 (back view)
TRANZ 460
Serial Interface Cable
Figure 3-5. Serial Interface Cable Connection
Note: If connection is via DVM only, the terminal’s
TRANZ 460 Terminal | 3 - 3 |