5. Programming the Terminal for Use
Check Memory Location 0019 to ensure your terminal is loaded with the correct software version before you begin programming. Press BLUE + 7, then enter 0019. The terminal should display " 0019 = FRET462." If Memory Location 0019 contains data other than this, please contact your VeriFone representative.
To prepare your terminal for use, you must enter the Setup function key sequence (BLUE + 4) and Codes 1 through 0 for the selected Setup.
1 | = Host Setup | 6 = Sale Type Description | |
2 = Account Range Tables | 7 = Printer Type/PINpad Device Setup | ||
3 | = Security Setup | 8 | = Change Idle Prompt |
4 | = Password Setup | 9 | = Clear Batch |
5 | = Terminal Options | 0 | = Card Type Label |
Host Information
Use this function to store the FDC host telephone numbers and merchant IDs. The merchant ID should be programmed without a prefix. This appli- cation displays current data for verification or change. To enter Host Setup:
1.Press BLUE + 4.
2.Key in the manager password.
3.Press the BLUE enter key.
4.Press Code 1.
Note: You may press the [ENTER] key to bypass any field and not disturb what has already been programmed. If something is already programmed and you wish to make a change, you must first press [BACKSPACE], then key in the new data.
DisplayResponse
HOST INFO
FDR PRIMARY #? FDR SECOND #? FDR CLOSE PHONE? FDR MERCH ID?
FDC Host primary and secondary phone numbers and merchant ID number. If you need to dial "9" first, then pause, enter
If this is an FDC "public port" number, add "LØ" or "XØ" at the end of the telephone number. For example, if the local "public port" number is
TRANZ 460 Terminal | 5 - 1 |