Uniden UBCT9 manual Remote Interface, PC Control Mode

Page 52

Remote Interface

You can communicate and program your UBCT9 in numerous ways with peripheral devices using a Remote Interface Cable port. This radio offers the following modes:

•PC Control mode

Program and control your scanner from a PC using Uniden’s UBCT9 Scanner Software.

•Clone mode

Clone all the frequencies, trunking talkgroups, and fleet maps programmed into your scanner to another UBCT9 scanner.

PC Control Mode

To connect Scanner to PC:

Plug the scanner end of the RS232C straight cable into the remote port which is on the rear of the scanner. Plug the other end of the cable (DB-9 serial connector) into a personal computer’s serial port. A few PC’s may require an adapter, most will not. Of course, make sure your PC is turned ON.

To program your scanner:

You can program and control your scanner remotely from a PC using Uniden’s UBCT9 Scanner software.

After connecting the scanner to a PC, turn the scanner ON.

To use the Remote (PC Control) mode, you must install Uniden’s UBCT9 Scanner software and use as directed. Make sure that your scanner is connected to the serial port of the PC using the RS232C straight cable.

48

UBCT9 OM 48

12/11/07 3:54:01 PM

Image 52

Contents UBCT9 Scanner Precautions Contents Edacs Range Mhz Mode Step IntroductionFront and Rear Views Selector SQL, FlashIcon Display Number 1 2 3 4What is Scanning? What is Searching?What is Trunk Tracking? TerminologyUBCT9 OM Feature Highlights Optional Accessories Included with Your Scanner PackageFor Home Use Desktop Installation Installing the UBCT9For Mobile Use In-Car Installation Connecting the Power Cord Installation for everyday use Typical Mounting Methods Mounting the Scanner in Your VehicleApplying Power for Vehicle Installation DC power InstallationApplying Power Using Standard AC Power Connecting an External SpeakerConnecting the Clone Cable Listening SafelyScanning Overview Turn the Scanner OnSetting the Squelch How Squelch WorksSelecting the State State ScanningPress Police Storing State Scan Frequencies State Scan HoldSkip a frequency Set Close Call Mode Close Call RF CaptureClose Call Operation Set Close Call Option Select Close Call BandsSetting of pager screen Alert Tone VolumeAlert Light Adjustment Set Close Call AlertProgramming Frequencies into Channels Private Bank ScanningDeleting a Stored Frequency Memory Lock Duplicate Frequency AlertScanning Private Bank Hold/Resume Restoring a Locked-out Channel in Hold ModeChannel Lockout Restoring All Locked-out Channels Priority ScanChanging the Priority Channel Then press HOLD/RESUMEService Scanning Police Rail Roads Aircraft Marine Band UHF CB BandSetting a Search Band Mode Step DisplayBand Search Band NoData Skip Search Hold FeatureFrequency Skip Delay Storing Search FrequenciesTrunk Tracking Programming Trunking Frequencies Selecting Trunking System TypeProgramming Trunking Frequencies Programming Talk Group ID/Scan ListsTo enter a Type 2 Talk Group ID To enter a Type 1 IDTo enter a Full Edacs ID To enter a Partial Edacs IDID Scan Mode Receiving Trunked SystemsID Search Mode ID Scan Hold FeatureTo directly access a specific ID location ID Monitor Mode ID Search Hold and Direct Entry ID in Hold ModeProgramming Scan Lists During Search Deleting a Stored IDTo restore a single ID, follow these steps To restore all locked out IDs in a bank onceID Lockout Review ID LockoutSetting the Delay Mode for Trunking Mode Setting Priority in Trunking ModeTrunking Frequency Confirmation Moving between Scan List MemoriesMulti-Track Multi-Track Operational DetailsEdacs Tracking Edacs ReceptionProgramming Edacs System Frequencies An Edacs Trunked system FormatSpecial Edacs Features Edacs ID Range SearchLTR Reception LTR TrackingMotorola Reception Motorola TrackingFleet Map Programming Selecting Preset Fleet MapProgramming a User Fleet Map Programming a Hybrid System Control Channel Only Mode Toggling the Status BitDisconnect Tone Detect Option End Code PC Control Mode Remote InterfacePC Control Parameter Clone ModeFor your information To connect the Scanner to Scanner 12/11/07 35404 PM Care and Maintenance General UseTroubleshooting Problem Suggestion12/11/07 35405 PM Specifications Appendix State Code Order State NamePreset Fleet Maps 12/11/07 35407 PM User Defined Fleet Maps Type I Programming InformationFleet Map Size Codes Size Code Restrictions Memo Memo Uniden UBCT9 Scanning Receiver One Year Limited WarrantyFax 02 9599 Fax 09 274 Thank YOU for Buying a Uniden Product