Uniden UBCT9 manual 12/11/07 35405 PM

Page 58

If you experience difficulty while in TrunkTracker mode, try the following steps.

Problem	Suggestion

Scanner won’t track.	1.	Missing the Data Frequency.
	2.	Change to a Type 1 Scanner setup.
		Review Fleet Map Programming on page 44.

Scanner won’t stop	1.	No IDs have been programmed.
during Scan List	2.	The IDs you have stored are not active.
mode.

Scanner will not	1.	Adjust the squelch for Trunking mode - refer to page 29.
acquire	2.	Missing the frequency used for the data channel.
data channel.		Check your frequency list.

Missing replies to	1.	Change a Type 1 scanner setup.
conversations.		Review Fleet Map Programming on page 44.
	2.	Try another Preset Fleet Map or Program your own Fleet
		Map.
	3.	Check to see that all of the system’s frequencies have
		been entered.

Channel Activity	1.	May be a telephone interconnect call, which are
Indicators are flashing		intentionally blocked by your scanner.
but no sound is heard.	2. The ID on your display is not active.

Scanner not tracking	1.	Logical channel numbers (frequencies) for the system are
an EDACS system		not programmed in the correct order. Check frequency
properly.		resources and reprogram.
	2.	Not all frequencies for the system are programmed.
		Check frequency resources.

If you still cannot get satisfactory results while using your scanner or if you want additional information, please see the Uniden contact details in the warranty page at the back of this manual.

If you have internet access, you can visit www.uniden.com.au, www.uniden.co.nz for additional information.

54

UBCT9 OM 54

12/11/07 3:54:05 PM

Image 58

Contents UBCT9 Scanner Precautions Contents Edacs Range Mhz Mode Step IntroductionFront and Rear Views Selector SQL, FlashIcon Display Number 1 2 3 4What is Trunk Tracking? What is Scanning?What is Searching? TerminologyUBCT9 OM Feature Highlights Optional Accessories Included with Your Scanner PackageFor Home Use Desktop Installation Installing the UBCT9For Mobile Use In-Car Installation Connecting the Power Cord Installation for everyday use Typical Mounting Methods Mounting the Scanner in Your VehicleApplying Power for Vehicle Installation DC power InstallationConnecting the Clone Cable Applying Power Using Standard AC PowerConnecting an External Speaker Listening SafelyScanning Overview Turn the Scanner OnSetting the Squelch How Squelch WorksSelecting the State State ScanningPress Police Storing State Scan Frequencies State Scan HoldSkip a frequency Set Close Call Mode Close Call RF CaptureClose Call Operation Set Close Call Option Select Close Call BandsAlert Light Adjustment Setting of pager screenAlert Tone Volume Set Close Call AlertProgramming Frequencies into Channels Private Bank ScanningDeleting a Stored Frequency Memory Lock Duplicate Frequency AlertScanning Private Bank Hold/Resume Restoring a Locked-out Channel in Hold ModeChannel Lockout Changing the Priority Channel Restoring All Locked-out ChannelsPriority Scan Then press HOLD/RESUMEService Scanning Police Rail Roads Aircraft Marine Band UHF CB BandBand Search Setting a Search BandMode Step Display Band NoData Skip Search Hold FeatureFrequency Skip Delay Storing Search FrequenciesTrunk Tracking Programming Trunking Frequencies Selecting Trunking System TypeProgramming Trunking Frequencies Programming Talk Group ID/Scan ListsTo enter a Full Edacs ID To enter a Type 2 Talk Group IDTo enter a Type 1 ID To enter a Partial Edacs IDID Scan Mode Receiving Trunked SystemsID Search Mode ID Scan Hold FeatureTo directly access a specific ID location Programming Scan Lists During Search ID Monitor ModeID Search Hold and Direct Entry ID in Hold Mode Deleting a Stored IDID Lockout To restore a single ID, follow these stepsTo restore all locked out IDs in a bank once Review ID LockoutTrunking Frequency Confirmation Setting the Delay Mode for Trunking ModeSetting Priority in Trunking Mode Moving between Scan List MemoriesMulti-Track Multi-Track Operational DetailsEdacs Tracking Edacs ReceptionProgramming Edacs System Frequencies An Edacs Trunked system FormatSpecial Edacs Features Edacs ID Range SearchLTR Reception LTR TrackingMotorola Reception Motorola TrackingFleet Map Programming Selecting Preset Fleet MapProgramming a User Fleet Map Programming a Hybrid System Control Channel Only Mode Toggling the Status BitDisconnect Tone Detect Option End Code PC Control Mode Remote InterfacePC Control Parameter Clone ModeFor your information To connect the Scanner to Scanner 12/11/07 35404 PM Care and Maintenance General UseTroubleshooting Problem Suggestion12/11/07 35405 PM Specifications Appendix State Code Order State NamePreset Fleet Maps 12/11/07 35407 PM User Defined Fleet Maps Type I Programming InformationFleet Map Size Codes Size Code Restrictions Memo Memo Uniden UBCT9 Scanning Receiver One Year Limited WarrantyFax 02 9599 Fax 09 274 Thank YOU for Buying a Uniden Product