Viking 56K manual Technical Notes, Status Light Definitions

Page 24

VIKING COMPONENTS 56K EXTERNAL MODEM USER’S GUIDE

4 Technical Notes

This chapter covers the definitions of the status lights on the front of your exter- nal modem, the COM port and IRQ settings, and information necessary when the system does not automatically configure the fax/modem properly.

Status Light Definitions

22Chapter 4

Image 24

Contents Viking 56K External Modem Table of Contents Introduction Data ModemBefore You Install System RequirementsPhone Line Requirements Communications Software requirementsInstallation Hardware InstallationHardware Installation Turn on your computer and any attached devices Software Installation Mac OS 7.5.3 or LaterYour driver installation is now complete MacComCenter Communication Software Your MacComCenter software installation is now complete Remote Access/Mac PPP Setup Free PPP SetupWindows 95 Software Windows 98 Software Windows 98 Software Your installation is now complete Windows NT Windows NT Windows NT Windows NT Your installation is now complete Using Data and Fax Communication Software Changing the modem Initialization StringTechnical Notes Status Light DefinitionsWindows 95 & 98 COM Ports and IRQ Settings Identifying COM Port SettingsChanging the IRQ Settings Chapter Problem Solution GeneralATL0 Mac OS 7.5.3 or Later Connection Scripts Mac OS 7.6 or LaterBasic AT Commands Basic AT Command SetGuidelines Error Detected, No Answer Disable guard tone Initiate local analog loopback +MS ECC Commands MNP 10 CommandsClass Commands Caller ID CommandsFax Class +FET=N Modem Driver & Firmware Upgrades Contacting Technical Support Viking Components Technical Support Phone NumberCommunication Regulations Industry Canada IC NoticePart 68 Requirements Part 68 Requirements Warranty & Disclaimers Year Warranty