Viking 56K manual ECC Commands, MNP 10 Commands

VIKING COMPONENTS 56K EXTERNAL MODEM USER’S GUIDE

ECC Commands

Command	Function
%C0	Disable data compression.
%C1	Enable MNP 5 data compression.
%C2	Enable V.42 bis data compression.
%C3	Enable both V.42 and MNP 5 compression.
\A0	Set maximum block size in MNP to 64.
\A1	Set maximum block size in MNP to 128.
\A2	Set maximum block size in MNP to 192.
\A3	Set maximum block size in MNP to 256.
\Bn	Send break of n x 100 ms.
MNP 10 Commands

Command	Function
)M0	Disable MNP 10 link negotiation power adjustment.
)M1	Enable MNP 10 link negotiation power adjustment.
)M2	Enable cellular mode without power level adjustment during MNP link
	negotiation.
*H0	Select MNP 10 link negotiation at highest rate.
*H1	Select MNP 10 link negotiation at 1200 bps.
*H2	Select MNP 10 link negotiation at 4800 bps.
-K0	Disable MNP 10 extended services.
-K1	Enable MNP 10 extended services.
-K2	Enable MNP 10 extended services detection only.
-Q0	Disable MNP 10 fallback to 2400 bps (V.22 bis)/1200 bps (V.22).
-Q1	Enable MNP 10 fallback to 2400 bps (V.22 bis)/1200 bps (V.22).
-SEC=0	Disable MNP10-EC.
-SEC=1,[<tx level>]

Disable MNP10-EC and set transmit level <tx level> 0 to 30 (0 dBm to -30 dBm).

34Chapter 6