Monitor Adjustments
ON-SCREEN DISPLAY
The LCD monitor features an On- Screen Display (OSD) with menus designed to make adjusting the monitor display settings easier. When highlighted, the icons illustrate the control function to assist in identifying which control needs adjustment.
Before activation of the OSD menu, the Enter button 
can be used to automatically adjust the display to the proper size and horizontal and vertical position. The monitor must be set to one of the 15 factory preset timing modes to utilize this feature. The OSD menu activates automati- cally when the Enter button 
on the rear of the monitor is pressed. The OSD remains centered on the screen while the adjustments are made. Use either the 
or 
button to move the highlight to the control to be selected. A submenu or the control with a status bar will appear. From the factory
preset, the status bar indicates in which direction the adjustments are being made. Use the 
or 
button to adjust the control. In addition, a second control icon will appear allowing to toggle between the two controls.
The contrast and brightness can also be adjusted by simply pressing either the 
or 
button.
When you have finished making adjustments, press the 
button to save the setting and exit back to the main menu. If the buttons are left untouched for 15 seconds, the settings will be automatically saved and exited. While in the main menu, pressing the 
button will save and exit the OSD.
14
Doc#