Waves IR-L, IR-1 manual IR-360 Controls, Toolbar WaveSystem Controls

IR-360 Controls:

These Controls are exclusive to the IR-360:

FRONT/REAR BALANCE: Range: Front to Rear; Default 50.0

The Front/Rear Balance control determines how much of the reverb is going to the front vs. the rear speakers. For instance, if the control is set to 65, then 65% of the Reverb will be put in the front speakers and 35% will be put in the rear speakers.

PRE-DELAYOFFSET: Range: 0 to 80ms; Default: 0

This control adds a time delay to the reverb on the rear speakers. It can create an effect similar to that of a digital delay plug-in.

OUTPUT METERS VIEW: Range: -30 to 0 dB

These meters show how much total signal (combined wet and dry) is going into each surround channel.

Toolbar WaveSystem Controls

There is a view of the Toolbar WaveSystem Controls on the following page:

Waves IR-1 software guide page 33 of 40