Adams MDW-250L manual User Parameters

7.0 User Parameters

This indicator has 4 parameter settings that can be selected.

1.When the scale is in normal weighing mode, press and hold down the [ON / OFF] key and the [UNIT] key for 3 seconds until ‘SEtUP’ is shown on the display.

2.When in the SETUP mode, press the [Print/Hold] key to change the flashing digits, and [TARE] key to confirm the flashing digits and move to the next parameter setting. Press the [ON / OFF] key to exit the set up mode.

3.Parameters setting summary:

Parameter	x/xy	Factory Set		Setting
			Auto-off time:
A.o.t.	00-15	05	No auto-off = 00.
			01-15 minutes auto-off time.
			0	= Only Print Function
			1	= Only Hold Function
P.H.	0,1,2	1	2	= both HOLD and PRINT function (pressed
				down less 3s,this key works as Print
				function; pressed down more than 3s,this
				key works as HOLD function)
			Hold work time:
			0	= no time limit.
H.t	0-4	0	1	= 10 seconds
			2	= 30 seconds
			3	= 60 seconds
			4	= 120 seconds
			0	= No RS232 Function.
			1	= Continuously outputs display data.
S.F.	0-3	0	2	= Output display data when PRINT pressed
			3	= Bi-directional communication (the scale
			receives and executes commands from the
			HOST device)

© Adam Equipment Company 2012 Page 10 Rev C5, January 2012