5.0 FUNCTION
5.1WEIGHING
∙Place the Scale on an even floor and press the [On/Off] key.
∙The instrument performs a
∙Press the [On/Off] key and the machine switches off.
∙The person to be weighed can step on to the platform once the scale shows 0.0 on the display. The weight will be display in Kg. or lb. depending on the units chosen by the user.
∙If the weighing value is to be tared press the tare key to remove the weight value from the display.
∙Press the [Units] key for changing the weighing unit to kg or lb. The LED will indicate the chosen weighing unit.
∙Overload display: When “FULL” appears on the display, it shows that the load on the platform is over the maximum capacity. Under these circumstances, it is necessary to reduce the load otherwise the sensor or the platform will be damaged.
∙Hold Function: To lock the weighing result, press the [Print/Hold] key. The LED will flash until a stable reading has been obtained and then it will light up constantly. To release the function, press the [Print/Hold] key again.
∙Print Function: To send the weighing result to a printer or computer press the [Print/Hold] key when the [Print/Hold] key has been set up in the parameter section to work as print function.
(Print function is only applied for scale with RS232 interface)
© Adam Equipment Company 2012 | Page 7 | Rev C5, January 2012 |