Introduction and Installation
4 Attach the power cable to the terminal. See page 16 for details on how to attach the power cable.
•If you want to use your own power cable, see page 9 for the type and distance.
<Inside of main unit (bottom case)>
5 Attach the wires that connect to the monitor station and sub monitor station to the terminal. See page 16 for details on how to attach the wires.
•See page 9 for the wire type and distance.
•See the wiring schematic diagram on page 9.
Terminal (Non polar)
Button
Wire
(Not included)
Power switch
• When the front case is attached, the power switch will be pressed and power will be supplied.
12