Panasonic VL-GM001 installation and operation guide Additional safety information

Page 4

Important Information

Additional safety information

1.Use only the power source marked on the unit. If you are not sure of the type of power supplied to your home, consult your dealer or local power company.

2.Use only the specified AC adaptor.

3.Do not tamper with the plug.

4.Make sure the plug is securely inserted.

5.Do not touch the plug with wet hands.

6.Do not place objects on the power cord. Install the unit where no one can step or trip on the cord.

7.To reduce the risk of electric shock, do not disassemble this unit. Take the unit to an authorized service center when service is required. Opening or removing covers may expose you to dangerous voltages or other risks. Incorrect reassembly can cause electric shock when the unit is subsequently used.

8.Unplug this unit from power outlets and refer servicing to an authorized service center when the following conditions occur:

A.If smoke rises, or an unaccustomed noise or smell is discharged from the unit.

B.If metal objects have been dropped inside the sub monitor station.

9.Do not put your ear(s) near the speaker, as loud sounds emitted from the speaker may cause hearing impairment.

10.Only a qualified technician is allowed to connect a power cable to the unit. Contact an authorized service center.

11.Do not make any wiring connections when the power supply is turned on.

12.Never install wiring during a lightning storm.

13.Do not connect a power cable other than the specified voltage.

14.Do not connect the power cable to any terminal other than the one specified.

15.When existing chime wires are used, it is possible that they contain AC voltage. Electric shock or unit damage could result. Contact an authorized service center.

16.Never touch the inside of the sub monitor station. High voltage is present.

17.Make certain when mounting the unit to any wall surface that the method used will hold the weight of the unit properly.

18.If the wiring is outdoors, use a protection tube or a surge protector.

19.If the wiring is underground, do not make any connections underground.

20.WARNING – To Reduce The Risk Of Fire Or Electric Shock, Do Not Expose This Apparatus To Rain Or Moisture.

21.WARNING – Unplug this unit from power outlets if it emits smoke, an abnormal smell or makes unusual noise. These conditions can cause fire or electric shock. Confirm that smoke has stopped and contact an authorized service center.

Note:

This product has a fluorescent lamp that contains a small amount of mercury. It also contains lead in some components. Disposal of these materials may be regulated in your community due to environmental considerations. For disposal or recycling information please contact your local authorities, or the Electronics Industries Alliance: <http://www.eiae.org.>

4

Image 4
Contents Installation and Operation Guide Introduction and Installation Important InformationHelp General InformationImportant safety instructions Do not OpenAdditional safety information For best performance Included items QuantityLocation of controls Before installation Standard installation position of the sub monitor stationWiring schematic diagram Power cable/wire type and distanceInstalling the sub monitor station Installation size Inside of main unit bottom case Remove the front case from the bottom case Introduction and Installation To attach the AC adaptor and the DC terminal to a wall To attach the power cable Sub Monitor station DC terminal Correct Incorrect To attach the wiresCleaning Important informationTechnical data about this product Page Panasonic Puerto Rico, Inc For your future referenceCopyright