General Information
Technical data about this product
Sub Monitor station
Power supply: Current consumption:
Dimensions:
Mass (Weight): Operating environment:
Installation method:
External material:
24 V DC
Standby: Approximately 38 mA
At operation: Approximately 210 mA
Approximately height 145 mm x width 165 mm x depth 44 mm (5 3/4″ x 6 1/2″ x 1 3/4″)
Approximately 600 g (1.32 lb.)
0 °C to 40 °C (32 °F to 104 °F), Up to 90 % RH (Relative Humidity) non condensing Exposure mount
Flush mount (Optional Flush mount unit is required.) Flame retardant ABS resin (panel: acrylic resin)
Note:
•To connect to a chime, make sure the chime is:
–Normal open (Low active)
–Less than 30 V AC (1 A), 24 V DC (1 A)
AC adaptor (Part number: PFAP1014)
Power supply: | 100 V – 240 V AC , 50 Hz / 60 Hz |
Output voltage: | 24 V DC |
Output current: | 2 A |
Dimensions: | Approximately height 120 mm x width 60 mm x depth 35 mm |
Mass (Weight): | (4 3/4″ x 2 3/8″ x 1 3/8″) |
Approximately 310 g (0.68 lb.) | |
Operating environment: | 0 °C to 40 °C (32 °F to 104 °F), Up to 90 % RH |
| (Relative Humidity) non condensing |
Note:
•Design and specifications are subject to change without notice.
•The pictures and illustrations in these instructions may vary slightly from the actual product.
18