Using Wireless Manager ME (cont.)
■Index style
1Check the status indication on the launcher to make sure that transmission is possible (check that the green lamp is lighted).
2
3
Click [ 
] on the launcher.
Select and click the projection position.
The computer image is transmitted to the area of the corresponding icon.
Enlarged display
•Use the [ 
] buttons on the remote control to move the focus to the image to be enlarged, and press the [ENTER] button. The image is enlarged and displayed at the top of the projection screen.
•The image display will fill the entire screen if the [ENTER] button is pressed again.
•To return to the screen before, press the [ENTER] button again.
Note:
While an enlarged image is displayed, the [ 
] buttons on the remote control will function in the same way as the computer’s up and down keys. This means that if
you run a computer application that supports the[ 
]buttons, the presentation screen can be changed using the remote control.
Now use the [ 
] button to set the window of the application that you want to run to the active status. (If you operate the launcher, you will set the launcher to the active status: as a result, you will need to set the window of the required application to the active status again.)
22