Using Wireless Manager ME (cont.)
Operations when password entry is required for connection
When a projector with the [ 
] mark is selected, the window shown to the right appears. Enter the password and click [OK].
Notes:
•Click [CANCEL] at the password entry window to return to launcher (See page 16).
•When an incorrect password is entered, an error message appears. Click [OK] to return to the password entry window and enter the correct password again.
Adding and deleting connections
When [Network] is set to [USER] at the connection select window, connections can be added and deleted by the following operations.
■Adding a connection
1Click [Designate] at the connection select window.
The window shown to the right appears.
2 | Click [ADD] and enter the IP address |
(including its periods) of the connection |
to be added, and then click [REGISTER].
The newly registered connection is added to the connection list in the window shown in step 1.
■Deleting a connection
Select the connection to be deleted at the window shown in step 1 and click [DELETE].
26