Panasonic ET-CDWL2U Computer operations, Simple Wireless Connection Using the Initial Settings

Simple Wireless Connection (Using the Initial Settings) (cont.)

Computer operations

1

2

3

Insert the optional wireless card into the computer.

(See page 14)

Turn on the computer.

Select [Start] → [Programs] → [Panasonic Wireless Display] → [Wireless Manager mobile edition].

•Wireless Manager ME starts up, and the connection select window shown below appears.

4	Select the connection and click [OK].
	The launcher shown below appears and the connection with the projector is

established.

Notes:

•The initial network number setting for both the projector and the computer is “1”. These numbers must match for the connection.

•Depending on the computer and wireless card used, automatic setup may not be possible. If this is the case, the [Network] setting on the screen in step 3 above will be switched to [USER] automatically. For details of the connection procedure, first close Wireless Manager ME, and then refer to page 30.

16