Panasonic FT-LB10NTU, ET-CDWL2U, ET-CDWL3U, N5HBD0000028 manual Wireless user connections

Page 30

(See page 28)

Other Applications (Changing the Initial Settings) (cont.)

Wireless user connections

If the projector and computer could not be connected by following the steps on page 16, connect them by performing the steps below.

■Projector operations

1	Select [NETWORK] on the network
	menu, and press the [ENTER]

button.

2	Select [USER] with the [	]
	buttons, and press the [ENTER]

button.

■Computer operations

N E T W O R K
NETWORK		1
NAME CHANGE
INPUT PASSWD		OFF
AMEND PASSWD
WEB CONTROL		ON
DEFAULT
SELECT	ENTER	RETRN
N E T W O R K
USER
ADJ	ENTER	RETRN

1	Start up the wireless card utility.
	Make the same SSID,	Default projector network [USER] settings
	communication mode and WEP	SSID	: Panasonic Projector
	settings as the default projector	Communication mode : 802.11 AdHoc
	network [USER] settings.	WEP	: Off

2

3

Open the Windows TCP/IP Setting window.

Refer to the Windows manual for a detailed description.

For the subnet mask, register the same value as the default projector network [USER] setting.

For the IP address, enter the same value up to the “255” part of the default subnet mask setting for projector network [USER], and then enter a different value for the remainder.

Setting Example

	Setting item	Default projector network			Example of
	Setting item	[USER] setting		computer setting
		[USER] setting		computer setting
	Subnet mask	255. 255.	255. 0	255.	255.	255. 0
	IP address	192. 168.	10. 100	192.	168.	10. 101

Start up Wireless Manager ME, and select [USER] from the network number list.

Wait until the projector’s host name appears on the connection list, select the host name displayed, and proceed with the connections.

30

Image 30

Contents Network Function Edition Contents Network Function Edition Contents Network Function Edition Do not use near other wireless equipment Page Channels that can be used Projecting a computer image by wireless Examples of Network Function UsageOperation Software Installation System requirementsWireless Manager ME Wireless Manager ME Mobile EditionClick Wireless Manager ME Set the supplied CD-ROM in the CD-ROM driveWireless LAN Driver Window appearing in on Click Wireless LAN Driver atMount the optional wireless card Click NextRecommended checkbox is Make sure that the InstallSoftware automatically Checked, then click NextRemove the card InsertionRemoval Lock screwShut down Wireless Manager ME if it is in use Insert the supplied wireless card into the projector Projector operationsTurn on the projector Computer operations Simple Wireless Connection Using the Initial SettingsInsert the optional wireless card into the computer Select the connection and click OKCanceling the connection with the projector Click on the launcherClick Yes Using Wireless Manager ME StartupDescription of the connection select window Using Wireless Manager ME Description of the launcher and menuCheck the status indication on the launcher to make Live modeQuitting live mode Sure that transmission is possible check thatQuitting multi live mode Multi live modeSwitching to a different position Screen styleIndex style Enlarged displayOne shot mode Options Pointer modeQuitting pointer mode Select Normal or High DefinitionLive mode settings Shortcut key settingsClick Other Click ADD and enter the IP address Adding and deleting connectionsClick Designate at the connection select window Including its periods of the connectionSelect Network with Buttons, then press Enter button Displaying the Network MenuPress the Menu button on the projector Concerning on-screen items which are not displayedSelectlist. the network group from the network number Changing the network numberWith Buttons and press Projector operationsWireless connection with password Wireless user connections Changing the user settings Change the projector settings by WEB ControlComputer settings TCP/IP settingsWindows XP/2000 Windows Me/98SE Settings for optional wireless card ET-CDWL3U use Windows 2000/Me/98SE Other Applications Changing the Initial Settings Select Default at the network menu See page 27 Returning to the Initial SettingsStart the Wireless Manager ME and set the network number Press the Enter buttonUsing WebBrowser Control Projector settingsEnable checkbox under Active scripting Settings. If Use automaticSelect Security and set the security level to Default Righticon. -click the Internet ExplorerStarting up WebBrowser Control Top windowOption control window Projector controlBasic control window Click Projector Control in the menuNetwork setting window Password changing windowMonitor information window T66 United States Country or region Standard412 MHz Japan 412 MHz TaiwanInstalling the Wireless LAN Driver Place the supplied CD-ROM in the CD-ROM drivePage Computer. See Make sure that Yes, I want toCF card adapter and insert it Mount the ET-CDWL2U card intoClick Continue Anyway Click Finish Found New Hardware Wizard starts up Settings for ET-CDWL2U use Windows 2000/Me/98SE Using the ET-CDWL2UOptional wireless card When the uninstall complete message appears, click Software UninstallWireless Manager ME Make sure that a check is placed in the RemoveTerminology Terminology Subnet maskTroubleshooting Symptom CheckpointTroubleshooting Trademarks Panasonic Broadcast & Television Systems Company