2.3Scanning With the Job Memory
This section describes the procedure for scanning by accessing the stored jobs.
"Operating Instructions (For Copier)" for details on registering/deleting the job memory.
You can register the scanning features only, or the mailbox to be stored and the scanning features to the job memory.
Procedure
Select Retrieve Stored Jobs on the "Menu" screen.
If the screen below is not displayed, press the Menu button on the control panel to display it.
Select Scan Mode on the "Retrieve Stored Jobs" screen.
Select the job number from the buttons where you have programmed the jobs, then select Close.
2
Operating the Scanner
25