❑Product Servicing
If the suggestions in the charts do not solve the problem, we recommend that you take it to your nearest authorized Panasonic Service Center. The product should be serviced only by a qualified technician.
❑Replacing the Fuse
Use fuses of the same specified rating (15 A). Using dif- ferent substitutes or fuses with higher rating, or connect- ing the product directly without a fuse, could cause fire or damage to this unit.
If the replacement fuse fails, contact your nearest Panasonic Service Center for service.
❑ If the Unit Begins to | English | |
|
| |
Malfunction... |
|
|
Reset switch |
|
|
|
| |
Insert a hard, slender stick into the hole and push the | 46 |
|
switch. |
|
|
Important |
|
|
Push the switch only when the unit fails to operate with |
|
|
any buttons. (Stored settings and adjustments are not |
|
|
cleared.) |
|
|
If the unit fails to return to normal condition, call the near- |
|
|
est Panasonic Service Center and ask for repairs. |
|
|
OPEN / CLOSE 
TILT 
O / C
TEXT
ENTER
Reset switch
Note:
¡If the
Maintenance
❑Caution on Cleaning
Alcoholl
Pesticidei i
ThinnerhinnerWax
Benzine
Your product is designed and manufactured to ensure a minimum of maintenance. Use a dry soft cloth for routine exterior cleaning. Never use benzine, thinner or other sol- vents.
❑Cleaning this Unit
When the unit is dirty, wipe the surface of the display using the Wiping Cloth (supplied).
Cleaning without the supplied cloth
1Moisten the soft cloth in dishwashing
soap diluted with water and wring well.
2 Wipe lightly. Go over the same surface with a dry cloth.
Note:
¡Since there is the possibility of water drops getting inside of the unit, do not directly apply cleanser to the surface.
¡Do not scratch the screen with your nails or other hard objects. The resulting scratches or marks will obscure the images.
Caution
¡If water drops or similar wet substances get inside the monitor, it may cause a malfunction.
47