Panasonic CQ-VA7005W manual RGB Connector, System-up Connector, Radio Antenna Connector Radio ANT

Note:

¡To prevent from damage to the unit, be sure to follow the wiring diagrams below. ¡Be sure to fully plug in the connectors. Secure them with clamps and tapes.

¡All other installation methods require the use of dedicated metal fittings. Consult with a qualified servicing engineer or your dealer if other methods are required.

: This book refers to connections to the Panasonic car navigation system that will come onto the market in the future. Descriptions regarding the car navigation system are boxed with a dotted line.

RGB Connector

To the Panasonic Car Navigation System (available in future).

System-up Connector

To external devices equipped with system-up connector.

CQ-VD7005W (Rear)

English

10

	(R)(Red)
AV-OUT	(L)(White)
	(Yellow)
PRE-OUT FRONT	(R)(Red)
	(L)(White)
PRE-OUT CENTER	(Black)
PRE-OUT REAR	(R)(Red)
	(L)(White)
S.W-OUT	(Black)
	(R)(Red)
AV1-IN	(L)(White)
	(Yellow)
	(R)(Red)
AV2-IN	(L)(White)
	(Yellow)
CAMERA-IN	(Yellow)
REMOTE-IN

(Brown/black stripe)

REVERSE (Violet/white stripe)

Radio Antenna Connector (RADIO ANT IN)

Video Output Terminal (AV-OUT) Connect the rear monitor. (a page 16)

Pre-Out Connector (front)

To an external amplifier.

Pre-Out Connector (center)

To an external amplifier.

Pre-Out Connector (rear)

To an external amplifier.

Pre-Out Subwoofer connector (mono) To an external amplifier.

Video Input Terminal (AV1-IN/AV2-IN) Connect a VCR, camcorder, other brand’s car navigation system, etc. (a page 16)

Note: When an external device is connected to the system-up connector, the audio termi- nals, {(R)(Red), (L)(White)}, of AV2-IN are disabled.

Camera Input Terminal (CAMERA-IN) Connect a rear view camera. (a page 15)

Remote-In Lead

(not used)

Reverse Lead

When connecting the rear view camera, use the reverse lead. (a page 15)

Note: Use a Reverse Extension Cord !5if needed.

CQ-VD7005W

11