Panasonic CQ-VA7005W manual To Remove the Unit, Use the supplied Spacer !1if mounting hole of your

English

7

Installation (continued)

❏Installation Procedures (When not using Mounting Collar w)

Use the brackets supplied with your car when mounting this unit. The bracket shape and mounting method vary with car manufacturers, car types and manufacturing year. Please consult your nearest dealer or installer.

Select mounting screws according to the hole positions and hole shape of the bracket.

i Round Head Screw (5 mmø x 6 mm)	2 pieces
Recycle the Round Head Screws that fixed the transportation brackets for two more
positions.
!0Round Head Screw (4 mmø x 3 mm)	When using these
4 pieces	mounting holes

o Flat-Head Screw (5 mmø x 6 mm)	4 pieces
Use the supplied Spacer !1if mounting hole of your	i Round Head Screw
car is shaped like below.	(5 mmø x 6 mm)
Mounting Hole	!1Spacer
of a Bracket
(in section)

Bracket

Existing Bracket (R)

!2Double-Faced Adhesive Tape

i Round Head Screw	!1Spacer
(5 mmø x 6 mm)
	!2Double-Faced Adhesive Tape

Existing Bracket (L) (Bracket originally attached to the car)

To Remove the Unit

q Push the right and left clamp plates outward, one at a time, and pull the unit toward yourself. w After removing the right and left clamp plates, pull the unit with both hands till it comes out.

q w

Push here to remove the clamp plates.

8

CQ-VD7005W